|
|
|
|
|
|
|
|
|
|
|
|
P250A Profile Generator & Controller |
|
|
|
This instrument provides programming of basic heat treatment profile requirement (Rate, Dwell and Level). It comprises two inbuilt master controllers to allow further linking of related sub-units (DRM-C) to provide a highly competitive and accurate multi-zone control system base on a single profile. |
|
|
|
|
|
|
|
Din-Rail Mounted (DRM) Controller |
|
|
|
The DRM-C functions as a remote proportional controller, with a thermocouple measured value input, and P.W.M. setpoint input from profile generators (P250A). Up to 6 DRM-C's can be operated from one profile generator output thus providing an ideal low cost solution for a six zone installation. |
|
|
|
|
P560 Profile Generator & Controller |
|
|
|
P560 is a compact digital profile generator and controller developed to service single loop, single programme applications. Simple to set up and operate, the profile generator has 2 ramps, 2 dwells, and an easy to interpret eight L.E.D.'s mimic diagram. A four digit L.E.D.'s display indicates process temperature or parameter values which can be adjusted simply and accurately from pressure sensitive push buttons on the membrane-type front panel. |
|
|
|
|
PROTEUS 1000 Series |
|
|
|
The S1000 is a dual display high accuracy auto tuning controller with
exceptional flexibility and serial communications to SCADA systems. The P1000 is an user friendly S1000 controller with an integral profiler. P1000 provide up to 10 profiles, each of up to 25 segments and 2 event relays programmable in any combination on each segment |
|
|
|
|
|
|
Copyright © 2002 Industrial Heating (S) Pte Ltd |
|
